First drive

I’m not going to quote the Joe Walsh song, we all know it and it’s horribly cliché. But it’s the only song I know about a Maserati (if you happen to know of another one, leave a comment!).

No, I didn’t make it up to 185, have to keep things real, as well as within local speed limits.

"...does 185", but *we're* not doing 185. Not today.
“…does 185”, but *we’re* not doing 185. Not today.

Sylvia performed marvelously, aside from a temperamental starter – I thought that was fixed?!? I noticed at the start of my drive that there were a lot of rattles, creaks and noises in general. After a while everything seemed to settle down, and even later things were perfect, the only noise coming from the shifter badge that rattles once in a while. I notice that the asphalt quality has a lot to say as far as noise levels in the cabin go, and taking a few really nice long drives helped shake things down and allowed everything to settle in.

The first drive was in a downpour, and I was happy to note that not a single drop of water entered the cabin anywhere. Dry as a bone. The new seals perform perfectly, and also help to keep noise out.

A long drive on the freeway was uneventful, the car performing admirably, cruising along smoothly and rapidly for hours on end. Because of the comfort of the interior, you don’t really notice the acceleration or the true speed you’re traveling. 80mph feels more like 50. Hit the gas and you can see the speedometer gain rapidly, but the acceleration feels effortless. It’s very refined.

IMG_7516

There’s still a bit of vibration between 2200 – 2800 rpm in 3rd gear. One guy I spoke with said he suspects it’s the prop shaft and commented it immediately when we went for a drive. He thinks it probably happens in 1st and 2nd as well, but isn’t as noticeable at lower speeds. It’s not a huge deal, and the prop shaft went back into the car in the exact same orientation as when we took it out to overhaul the transmission (we marked it), but it is something I’d like to have checked and make sure it’s correctly balanced.

The new front headlights are brilliant! Literally. They light up the road so much better and are extremely precise in their throw, you can see exactly what area they cover perfectly, and it’s exactly the area needed to drive at night. The high beams only increase the reach and are nicely constrained to the road and shoulder. Kudos again to Daniel Stern, this is one of the best improvements I’ve made to the car.

Hit a double rainbow on the last drive, don’t know if you can see it. It’s lovely how the water beads on the car and simply rolls off.

Double rainbow over  autumn colors
Double rainbow over autumn colors

I’m very pleased with the color, it suits the car so much better than the purplish blue it was painted in before, and the depth and richness of the Blu Sera is truly striking.

All in all I’m extremely satisfied, and really happy to have the car back on the road.

Please don’t be tempted to think that this is the end of this blog – this is after all a 33 year old car! Next up is to put her on the dyno and see how many horses have escaped over the years, and if we can get them all back in the corral…

Comments are open!

The A727 transmission

Maserati has always been a small company. They didn’t have the resources to design and build tooling for the entire car and like many other small auto manufacturers utilized many off the shelf or OEM components.

The transmission in the Automatic versions of the QP3 is the (dare I say legendary) Chrysler Torqueflite A727. Designed by very talented engineers in the late 50’s and refined for decades. The standard choice for any heavy duty or high power application throughout the 60’s, 70’s 80’s and 90’s (although Chrysler had changed the naming convention by that time). Also the MOPAR standard for race cars, still loved and still out there winning.

Built to be bulletproof, simple, and reliable. Aside from a few minor details, it is.

As the vibrations in 3rd gear were really getting bad and winter was imminent with all it’s icy force, I decided to rent a spot in a workshop and overhaul my first transmission. Check back for pics outlining the gory details. It’s not yet back in the car, but that day isn’t far off (famous last words).

Image

For those of you looking to work on one of these, regardless of what kind of vehicle it’s in, here are some excellent links for info:

The legendary torqueflite automatic transmission

http://www.allpar.com/mopar/transmis…-tom-hand.html

http://www.youtube.com/watch?v=xzJhCBZ1wMY

Amazon.com: Torqueflite A-727 Transmission Handbook HP1399: How to Rebuild or Modify Chrysler’s A-727 Torqueflite for All Applications (9781557883995): Carl Munroe: Books

A-727 Torqueflite Diagnosis Dial

We did actually get the tranny back in the car, and my son learned a lot, among other things how to use a torque wrench, how to organize work in stages, keep things clean (despite what the picture might indicate…it’s a rented garage!) and follow directions.

Torquing down the bolts
Torquing down the bolts

When I get some time I’ll put together a list with pictures outlining the entire process. All in all it was pretty simple.

Has anyone else overhauled their transmission? How did it go?